Installing an LED light under the kitchen cabinet can be very useful in many ways. If you like cooking and you spend a lot of time in the kitchen then you must get kitchen strip light under your cabinets.
This way you will be able to see what you are doing more clearly and there are fewer chances that you will cut yourself on the cutting board.
You will also be able to cook properly inconvenience after getting a direct source of light from above. This is the reason why you should get kitchen strip lights installed in your kitchen.
If you are here today then you are probably interested in getting LED tape installed under your kitchen cabinet so worry no more because we are here to help you out.
In this article we are going to you tell you how you can fix LED lights under kitchen units!
To keep on reading to find out more information about kitchen strip lights!
1. Measurements:
The first thing that you need to do in this regard is to the whole space where you want to install the kitchen strip lights. The next thing that you need to do is to cut the LED tape in a proper length.
If you find it too much work to cut the LED tape by yourself then you can just order a customizable one and they will send you LED tape that has already been cut in the length that you desire.
2. Solder:
When you have cut your LED tape then the next thing that you need to do is to solder the blogs to the copper pads. The copper pads are on top of the LED kitchen light.
3. Positive And Negative:
The next thing that you need to do is to make sure that you have soldered the wires in an appropriate manner. Make sure that the positive wires are attached with the Plus sign and the negative wires are attached with the minus sign on the pad.
The positive wire will be red, brown, or black in color. Whereas, the negative wire will be blue or white in color.
4. Wiring:
The next thing that you need to do to install LED strip lights in your kitchen under the cabinet is to do the wiring with the main PowerPoint.
When you will check you will find out that the Transformer comprises of three different colored wires. What you need to do is to match these three wires with the main PowerPoint and connect these wires together.
5. Final Step:
The next step is to attach the Transformer with the lower surface of your kitchen cabinet and once you have installed the Transformer correctly you can now attach the LED tape simply.
In the end, all you need to do is to switch on your LED lights and check if it’s working. If it’s working then just sit back and relax. You have done all the hard work now and you should be happy that you successfully install the kitchen strip lights by yourself!